Pomelo Lee workspace

CentOS Linux解决Device eth0 does not seem to be present

星期四, 2014-08-21 | Author: LeecloseAuthor: Lee Name: lee
Email: [email protected]
Site: https://www.pomelolee.com/
About: webgame网页,手机游戏服务端架构和开发者See Authors Posts (492) | JAVA-and-J2EE, linux | 3,898 views

直接复制了Oracle VM VirtualBox的镜像文件vdi 可以直接创建新的系统镜像真是方便，不过遇到了
Device eth0 does not seem to be present 的问题，在网上找到遇到同样问题的解决方法,
很顺利的解决,记录之：

ifconfig…没有看到eth0.。然后重启网卡又报下面错误。

故障现象：

service network restart
Shutting down loopback insterface: [ OK ]
Bringing up loopback insterface: [ OK ]
Bringing up interface eth0: Device eth0 does not seem to be present,delaying initialization. [FAILED]

CentOS Linux解决Device eth0 does not seem to be present

解决办法：

首先，打开/etc/udev/rules.d/70-persistent-net.rules内容如下面例子所示：

# vi /etc/udev/rules.d/70-persistent-net.rules
# This file was automatically generated by the /lib/udev/write_net_rules
# program, run by the persistent-net-generator.rules rules file.
#
# You can modify it, as long as you keep each rule on a single
# line, and change only the value of the NAME= key.
# PCI device 0x1022:0x2000 (pcnet32)
SUBSYSTEM==”net”, ACTION==”add”, DRIVERS==”?*”, ATTR{address}==”08:00:27:7e:8c:e7″, ATTR{type}==”1″, KERNEL==”eth*”, NAME=”eth0″
# PCI device 0x1022:0x2000 (pcnet32)
SUBSYSTEM==”net”, ACTION==”add”, DRIVERS==”?*”, ATTR{address}==”08:00:27:30:c2:57″, ATTR{type}==”1″, KERNEL==”eth*”, NAME=”eth1″

记录下，eth1网卡的mac地址08:00:27:30:c2:57

接下来，打开/etc/sysconfig/network-scripts/ifcfg-eth0

# vi /etc/sysconfig/network-scripts/ifcfg-eth0

将 DEVICE=”eth0″ 改成 DEVICE=”eth1″ ,
将 HWADDR=”08:00:27:7e:8c:e7″ 改成上面的mac地址 HWADDR=”08:00:27:30:c2:57″

最后，重启网络

# service network restart
或者

# /etc/init.d/network restart

正常了，搞定

~谢谢打赏~

赏

Tags: centos, centos网卡

No comments yet.

Leave a comment